Opening document from Search results – This action couldn’t be performed because Office doesn’t recognize the command it was given

Hi I am trying to open an Office document by clicking on the search results document title, however an error box pops up saying:

This action couldn't be performed because Office doesn't recognize the command it was given.

From the same computer with the above error, it can open in Chrome OK.

If I copy the url of the document and paste it in to a new Window in IE, the document opens OK.

If I right click and open the document in a new tab in IE, again it opens OK.

It is only when left clicking and trying to open the document from the Search results window.

On another computer I get the same error as above in IE, and yet another third computer again it works in IE!

Screenshot of the issue is below:

error

Cómo pasar datos de un datagridview a un datatable (incluyendo una imagen) en vb.net?

Así la cuestión. Tengo una datagridview donde tengo cargados todos los productos y otro datagridview donde incluyo los productos a los cuales les quiero imprimir codigo de barra. En ese datagrid tengo cod, desc, lab, pres, medida, barcode (esta ultima es de tipo imagecolumn) como columnas. Lo que quiero es pasar todos los datos del segundo datagrid a un datatable para usarlo en un reporte de crystal reports.

Gracias de antemano

Autocad 2018 comportamiento

Deseo saber si Ubuntu ya permite el uso de autocad 2018? recuerdo que en años pasados ubuntu no corria dicho programa. agradezco a quien pueda indicarme, por que quisiera volver a utilizar ubuntu. gracias

Google translate:

I want to know if Ubuntu already allows the use of autocad 2018? I remember that in recent years ubuntu did not run this program. I thank who can tell me, because I would like to use ubuntu again. Thank you

Why is RAID 0 slower then single NVME drive

I created a MD RAID 0 array using two NVME drives. I realize using two different drives, rather than identical drives is not optimal, but when I just bought the new one they are all faster than my 1 year old drive. Using Patriot Scorch 512GB Nvme and Mushkin Helix 256GB. I made a 32GB partition on each, and created the MD RAID 0 array using 16k chunks, then formated to EXT4 to test.

kde-swiebel@T5600-kde:~$   cat /proc/mdstat Personalities : [raid0]  unused devices: <none> kde-swiebel@T5600-kde:~$   sudo mdadm -Cv -l0 -c16 -n2 /dev/md0   /dev/nvme0n1p3 /dev/nvme1n1p2  mdadm: /dev/nvme0n1p3 appears to contain an ext2fs file system        size=34277376K  mtime=Wed Dec 31 17:00:00 1969 mdadm: /dev/nvme1n1p2 appears to contain an ext2fs file system        size=34277376K  mtime=Wed Dec 31 17:00:00 1969 Continue creating array? y mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md0 started. kde-swiebel@T5600-kde:~$   cat /proc/mdstat Personalities : [raid0]  md0 : active raid0 nvme1n1p2[1] nvme0n1p3[0]       68487168 blocks super 1.2 16k chunks  unused devices: <none> kde-swiebel@T5600-kde:~$   sudo mkfs.ext4 -F /dev/md0 mke2fs 1.44.6 (5-Mar-2019) Discarding device blocks: done                             Creating filesystem with 17121792 4k blocks and 4284416 inodes Filesystem UUID: f9826f0f-7ba4-40b2-9c9f-861379e82703 Superblock backups stored on blocks:          32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,          4096000, 7962624, 11239424  Allocating group tables: done                             Writing inode tables: done                             Creating journal (131072 blocks): done Writing superblocks and filesystem accounting information: done    

Benchmarks from Gnome-disk-utility 3.32.1 1000 samples, 1MB size

Patriot Scorch average read: 1362.2 MB/s Average write: 228.7 MB/s Average access time 0.07 msec

Mushkin Helix Average read: 1529.5 MB/s Average write: 1003.1 MB/s Average access time 0.06 msec

/dev/md0 Average read: 1751.3 MB/s Average write: 26.9 MB/s Average access time 0.05 msec

Change to 100 samples, 100MB size, read-only /dev/md0 Average read: 2927.6 MB/s Average write: NA Average access time 0.04 msec

The read speed, while it is faster than either drive alone, is not too impressive but when I changed the test to read-only, it greatly improved. The write speed, however, was horrible. Write speed was 10% of the slowest drive.

I tried removing the RAID array and creating it with different chunk sizes (4K, 32K, 128K) but little changed with each. Write speed was between 11MB/s to 32MB/s

According to Phoronix and other sites I’m doing this right and should see much more gain.

Using mdadm version 4.1-1ubuntu1, kernel 5.0.0-25-generic Running on a Dell T5600 with dual Xeon E5-2609(Quad core 2.4Ghz)

Any ideas what I’ve done wrong?

Give 250+ profile back links of your business website for $20

Hello Guya !I work profile back links properly within 4-5 days.This Service is Very Important For Top Rank Your Websites. Profile Back links is Very Good Theme For A Website. I will provide you 250+ Profile Back links Creation Sites List.If You Want to Profile Back links Sites Name.You are in Right Place Now.Thank,s

by: seonoman
Created: —
Category: Link Building
Viewed: 341


Which algorithm for predicting the next word(s) based on previous words, given a sentence?

I want to input some words, and out comes the next word(s). Neural nets are really hot at the moment, and I’m afraid of throwing a neural net at something, when one is not really needed. Or… maybe it is needed?

My current options are:

  • Predict next word(s) using N-grams
  • Predict next word(s) using a neural net

There are quite a number of Github repositories that does this using neural nets, and a few that does it with N-grams. Are there any clear advantages to choosing the neural net approach?

How does Hand of the Apprentice interact with rogue abilities?

My Arcane Trickster took the Universalist School (as a wizard). Which has the Hand of the Apprentice ability.

  1. Since it does meet the 30 feet requirement for range, can he use his Sneak Attack with the Hand of the Apprentice ability?

He also has Finesse Training (from unchained rogue) with the rapier which allows Dex mod to damage instead of Str.

  1. Would his Dex or Str affect his (Hand of the Apprentice) damage since his rapier damage is based on Dex?

reset file input ajax error

Hola que tal he estado intentanto que en un formulario de mi web page el input de “file” se resete, agrego solo estos campos ya que los demás input que tengo en el formulario si se resetean, no se donde esta el error, solo no funciona en los “file”. El primero script que tengo es para mostrar el nombre del archivo no creo que este sea el problema, el segundo script es el ajax que estoy usando supongo que ahí esta el error.

<div class="custom-file"> <input type="file" class="custom-file-input" id="customFile"  name="archivo2"> <label class="custom-file-label" for="customFile1"> Sticker </label> </div>   <script> $  (".custom-file-input").on("change", function() { var fileName = $  (this).val().split("\").pop(); $  (this).siblings(".custom-file-  label").addClass("selected").html(fileName);}); 

 $  (document).ready(function(){ $  ('#frmajax').on('submit', function (e) {   e.preventDefault();     var datos = new FormData(this);     $  .ajax({         type:"POST",         url:"php/db.php",         data:datos,         cache: false,         contentType: false,         processData: false,         success:function(r){             if(r==1){                 alert(" ");             }else{                 alert("Agregado con exito");                 $  ("#frmajax")[0].reset();             }         }     });      return false;    });  });